5.0 · 49 reviews

(443) 880-7507

Interior Image MD logoInterior Image MDConstruction & Remodeling

Homeowner guide

How to Repair a Splintered Wood Deck, and What to Ask For

A splintered wood deck is usually repaired in this order: fix loose fasteners and swap out damaged boards, wash and clean the surface, sand the rough areas, fill gouges and seal longer cracks, then stain, paint or seal. DAP's deck guide treats splintering boards as a safety hazard, not just a cosmetic issue.

Updated

Sanding handles surface splinters; split or loose boards need more

DAP's guide also lists a few other signs that the deck is due for refinishing.

  • Splintering or splitting boards: a safety hazard as well as an eyesore.
  • Greying or fading wood: often caused by long sun exposure.
  • Peeling stain or paint: lets moisture in, which can lead to rot or mould.
  • Water test: pour a little water on the boards. If it soaks in instead of beading, the deck needs sealing or staining.

Boards splinter and crack because the wood swells and shrinks

Sun dries and fades unprotected wood.

The repair runs from inspection to finish coat

DAP's step-by-step guide sets out a sequence like the one below.

  • Check and fix: tighten fasteners that have worked loose and swap out split or broken boards.
  • Go gently near knots.
  • Clean and brighten: cleaner for bare wood, stripper for old coatings. Scrub, rinse, then apply a brightener so the stain takes evenly.
  • Fill: press stainable wood filler into deep dents or knot holes and let it dry fully.
  • Exterior caulk goes in longer cracks and must cure.
  • Finish: sweep the deck, then stain or paint on a mild, low-humidity day.

Stain, paint or sealant: each protects the repair differently

Which one suits your deck depends on whether you want to see the wood grain and how much upkeep you'll accept.

  • Stain: penetrates the wood and highlights its grain. It repels moisture to help prevent swelling, warping and rot, and UV-resistant types help guard against fading, drying and cracking.
  • Paint: forms a tough layer on top of the wood that keeps out moisture, dirt and debris. It needs upkeep less often, and touch-ups are straightforward.
  • Sealant: penetrates the wood to repel moisture and help prevent rot. Clear or lightly tinted, it keeps the wood's natural colour and grain, and it can go over stain for added protection.

What a deck repair quote should spell out

Ask for the repair in writing, step by step, so you can check it against the sequence above. The written estimate sets out the scope, materials, steps and price before work starts, and what is quoted is what you pay.

  • Whether the contractor is licensed and insured. Interior Image MD LLC is.
  • Workmanship warranty coverage: ask about it when you request your quote.

Common questions

Can I just sand the splinters off?

DAP's guide puts fixing loose fasteners and replacing damaged boards ahead of sanding.

How long before I can use the deck again?

According to DAP, stain or paint typically needs 24–48 hours to dry before the deck is used, depending on the product.

Do I need a permit to repair a deck?

Bring the permit question to the measuring visit and to your quote.

What happens next

If you're still working out what your deck needs, the decks and exteriors page explains what a deck job covers and how the quote works.

Mark measures and quotes in one visit, and you get a written estimate with the scope, materials and steps before anything starts.

See how our deck repair and refinishing work

Or call (443) 880-7507

Sources

  1. How to Repair & Refinish Your Deck | DAP Global — dap.ca
  2. Planning and Zoning Permits | Town of Princess Anne, Maryland — townofprincessanne.org
Call now Send photos