Laminate typically runs about $7 to $12 per square foot installed
National averages give you a starting range, not a quote.
- Homewyse: about $6.91 to $11.81 per sq ft installed (May 2026 national average, basic mid-range work).
- Taskrabbit: laminate material alone runs about $2 to $7 per sq ft.
- Taskrabbit: flooring installs of all types average $3 to $15 per sq ft, materials and labor together.
- Taskrabbit's data shows an average of about $54 per hour for floor installation labor nationwide.

Crown, wainscot, hardwood — the whole level finished in one pass
A per-square-foot figure leaves out more than you might expect
The Homewyse laminate figure assumes favorable site conditions and in-stock retail products. It includes underlayment, cutting and fitting, setup and cleanup, but not repairs to framing, trim or fixtures, hazardous material testing, permits or sales tax. Premium materials, tight schedules or local labor shortages can push costs higher.
- Homewyse suggests adding 13% to 22% if a general contractor supervises the project.
- Taskrabbit recommends budgeting 5% to 10% extra material for cuts and waste.
- Very small rooms may carry a minimum charge to cover time and travel, according to Taskrabbit.
- Homewyse says to measure the full floor area, including openings enclosed by it, when using online calculators.

Cabinets set to a laser line, not to an old crooked floor
Subfloor prep, removal and room shape drive most price differences
Any unevenness, rot or water damage has to be fixed before new flooring goes down, or the floor can squeak or crack later.
- Old floor removal: about $1 to $5 per sq ft, with tile costing more to remove than carpet (Taskrabbit).
- Subfloor leveling: about $2 to $8 per sq ft (Taskrabbit).
- Structural subfloor repair: about $10 to $30 per sq ft, depending on the damage (Taskrabbit).
- Underlayment or moisture barrier: about $0.50 to $5.50 per sq ft, materials and labor (Taskrabbit).
- Kitchens, bathrooms, stairs, diagonal or herringbone layouts and rooms with many corners take more cutting and labor.
- Areas with fewer installers may see lower labor rates but possible travel fees for remote locations.

Underlayment down first — the step that stops the squeak later
Hardwood costs more than laminate to buy and to install
If budget is the deciding factor, laminate usually comes in lower than hardwood. If long-term value and natural wood matter more, hardwood's higher material price and more intricate install may be worth it. The material figures below exclude labor.
- Laminate: about $2 to $7 per sq ft per Taskrabbit, with relatively easy click-and-lock installation.
- Solid hardwood: about $5 to $15 per sq ft per Taskrabbit, with a more intricate installation.
- Engineered wood: about $3 to $12 per sq ft per Taskrabbit; handles moisture swings better than solid hardwood.
- Tile: about $2 to $10 per sq ft per Taskrabbit; needs specialized cutting, setting and grouting.
- Thicker or premium-grade products raise both material cost and labor time.
Example: budgeting a 180-square-foot bedroom
This is an illustrative example, not a specific job. Say you want laminate in a large, rectangular bedroom of about 180 square feet over carpet. Taskrabbit's size table puts a room this size at roughly $700 to $2,000, before any surprises under the old floor.
What tips the final number is what turns up when the carpet comes off. A flat subfloor keeps you near the range; a sloped spot needing leveling, or a damp area needing repair, adds per-square-foot costs on top. That is why the decision comes down to a measured visit, not a calculator.
How Interior Image prices your floor
Each floor is measured and quoted in one visit. Mark is the one who measures and writes the estimate you are actually charged, and he has been known to do it on a Sunday.
- Written estimate with scope, materials, steps and price before work starts.
- What we quote is what you pay.
- If something hidden turns up, you hear about it before anyone spends your money.
- Free estimate, no pressure; licensed and insured.
- Ask about workmanship warranty coverage when you request your quote.
- One crew stays on your job, and the site is swept at the end of every day.
Common questions
How much does flooring installation cost overall?
Taskrabbit estimates about $3 to $15 per square foot including materials and labor. By room size, it lists roughly $500 to $1,000 for a 100 sq ft office, $900 to $3,000 for a 300 sq ft living room and $1,500 to $6,000 for a 500 sq ft open area.
How much does hardwood floor installation cost?
Taskrabbit puts solid hardwood material at about $5 to $15 per square foot, before labor, and notes the install is more intricate than some other options. Removal, leveling and underlayment add to that.
Do I need a permit to replace my floors?
Taskrabbit notes standard flooring replacements rarely need a permit, but structural changes or adding radiant heat may require local approval. Check with your local building department if your project involves either.
How long does a flooring installation take?
Taskrabbit says most flooring projects take 1 to 5 days, depending on material, square footage, removal, subfloor repairs, patterns, crew size and any acclimation or curing time.
When can I get an estimate?
Interior Image is open 7 days a week, 7 AM to 6 PM. Send the request form and Gianna or Mark will call you back, usually the same day, to set a time to measure.
What happens next
Ready to compare real numbers? Request a free estimate, or call (443) 880-7507.
Gianna or Mark calls you back, usually the same day, to set a time to measure. Your floor is measured and quoted in one visit, and you get the scope, materials and price in writing before anything starts.
Request a free written flooring estimate