5.0 · 49 reviews

(443) 880-7507

Interior Image MD logoInterior Image MDConstruction & Remodeling

Homeowner guide

How to Acclimate Flooring Before Installation

Most flooring should sit in the room where it will be laid for one to three days before installation, and solid hardwood for five days or more. BuildDirect gives 48–72 hours for laminate and LVP and at least 72 hours for engineered hardwood. CALI recommends at least 5 days for solid hardwood, or 10+ in very humid or dry regions. Room temperature, humidity and subfloor moisture matter as much as the clock.

Updated

How long each flooring type should acclimate

The wait depends mainly on how much natural wood the floor contains.

  • Laminate: 48–72 hours, per BuildDirect. It helps prevent swollen edges and tension in the locking joints.
  • WPC / flexible LVP: 48–72 hours, boxes stored flat and unopened in the installation room (BuildDirect).
  • SPC rigid core: 24–48 hours per BuildDirect, optional when the room is climate-controlled and stable.
  • Cork: 2–3 days in the installation area, according to CALI.
Installer rolling out green floor underlayment across a kitchen before plank flooring goes down

Underlayment down first — the step that stops the squeak later

Why temperature, humidity and subfloor moisture count

The goal is for the flooring, the subfloor and the air to reach the same moisture balance, so the floor doesn't expand or shrink after it's down. If the heating or air conditioning is off and windows are open, a longer wait won't fix a humidity mismatch.

Recent drywall, painting or a newly started HVAC system can all shift indoor humidity, which is why BuildDirect advises checking conditions even for products labelled no-acclimation.

  • Keep the heating or cooling running at your usual comfortable settings for a minimum of 48 hours ahead of the install and again afterward, so the room's conditions stay steady (BuildDirect).
  • Laminate, LVP and SPC target range: 65–85°F and 35–65% relative humidity (BuildDirect).
  • Engineered hardwood target range: 60–80°F and 35–55% relative humidity (BuildDirect).
  • Subfloor moisture: BuildDirect gives 12% or less for wood and 75% RH or less for concrete.
Finished white kitchen with granite counters, stone backsplash and wood-look plank flooring

White cabinets, stone backsplash, plank floors — kitchen handed back spotless

When rigid-core vinyl can skip the long wait

CALI says its wood-free SPC vinyl can go straight down over a clean, flat, dry subfloor. That holds only when the room is climate-controlled, the subfloor is dry and level, and the boxes have been indoors for at least 24 hours, per BuildDirect.

Products with wood in them, from engineered and solid hardwood to cork and some vinyl cores, need more time.

What to ask your installer about acclimation

Skipping acclimation can leave gaps, creaks or movement once the floor is down, according to CALI.

Ask about workmanship warranty coverage when requesting your quote.

Common questions

Is 'no acclimation required' on the box enough?

Only if the room is climate-controlled, the subfloor is dry and level, and the boxes have been indoors for at least 24 hours, per BuildDirect.

Next step

For installation timelines by floor type and what the job involves, read our flooring installation page.

See how our flooring installation works

Or call (443) 880-7507

Sources

  1. How Long Should Flooring Acclimate Before Installation? – BuildDirect — builddirect.com
  2. Flooring Acclimation | Hardwood, Vinyl, & More | CALI — califloors.com
  3. Acclimating: Why It’s Essential to Wait 48 Hours — Swiss Krono (laminate manufacturer)
  4. Laminate Flooring Standard Installation Guide 09 24 24 — Designer Choice laminate installation guide (PDF hosted by Brokering Solutions)
  5. 756563fe 5e45 459b 9f28 5711af8ed709 — Product installation document hosted by The Home Depot (solid hardwood; manufacturer not named in the excerpt)
Call now Send photos