A deck build runs in four main stages
TimberTech's building guide splits a new deck into the same stages most builders follow.
- Design and planning: size, shape, materials, fasteners and a permit check.
- Framing: footings, posts, beams, joists and blocking.
- Decking: fastening the boards, then picture-frame borders and fascia.
- Railing: posts set plumb, then panels, balusters, sleeves and caps.
Framing has the most steps, so it shapes the schedule
The frame is the structural part of the deck. It also says footings should be sized to your local frost line and soil.
- Dig and pour footings. In colder areas they go below the frost line to prevent frost heave.
- Attach and waterproof a ledger board to the house. A freestanding deck skips this step.
- Set posts and beams using code-compliant hardware.
- Joist tape on the joists and ledger helps keep moisture out.
Pre-work and permits can add time before building starts
The permit process usually involves a drawing and an inspection.
- Tearing down an existing substructure.
- Excavation or landscaping to clear or level the area.
- Working around limited access to the site.
- Permit: usually a drawing submitted to your local building department, then an inspection.
- Call 811 before digging. Buried lines can change where footings go, and with them the deck's size.
Design choices and who builds it change how long it takes
TimberTech says bigger decks, angles and non-traditional shapes add cost and complexity.
- Fasteners: options run from basic screws to hidden clips and color-matched plugs.
- Contractor: adds cost, but brings skills and equipment, builds to code and can guide or handle the permit.
How we set out the steps before your deck starts
We measure your deck and quote it in one visit. Your written estimate sets out the scope, materials, steps and price before we start. Every step is written in plain language, in the order we'll do it. One crew stays on your job, and the site is swept at the end of every day. If something hidden turns up once work is underway, you hear about it before any of your money is spent. Ask us about timing when we come to quote.
Common questions
How long does it take to build a deck?
It depends on the deck's size and shape, any pre-work, the permit and inspection process, and the stages of framing, decking and railing.
How many hours does it take to build a deck?
TimberTech's deck planning guide does not give an hour count for a build. It says labor costs depend on the design, and that materials and fastening choices also shape the overall cost. It notes that complex patterns such as herringbone or inlays raise labor costs, and that larger decks and non-traditional shapes add cost and complexity. It adds that pre-work, such as tearing down an old substructure, clearing or leveling the ground, or working around limited site access, can affect both the cost and the time a build takes. Because it depends on your deck, we measure and quote it in the same visit.
How long does it take to build a deck frame?
Framing covers footings, a ledger board for attached decks, posts, beams, joists, blocking and joist tape. It may also need inspections along the way.
How do I plan a deck build?
Decide on DIY or a contractor. Weigh the cost drivers and pick a size and shape that suits your use and yard. Call 811 before digging, sort out the permit, then choose a material with long-term upkeep in mind.
How long does it take to install deck boards on an existing frame?
If your existing substructure is in good shape, you can replace just the top boards. Board installation then covers fastening, borders and fascia.
Will a contractor handle the permit?
TimberTech notes that professional deck builders usually guide you through the permit or obtain it for you.
What happens next
When you're ready to see how a deck project runs from measuring to cleanup, start with our decks and exteriors page.
Tell us what's going on and we'll call you back, usually the same day. We measure and quote in one visit, with the scope, materials and price set before we start.
See what a deck job with us coversOr call (443) 880-7507
Sources
- How to Build a Deck: Deck Building Resource Center | TimberTech — timbertech.com
- Step-by-Step Guide: How to Plan a Deck for Your Home | TimberTech — timbertech.com
- Deck Inspection Guide + Checklist for Homeowner — TimberTech
- Deck Framing Guide: How to Frame a Deck | TimberTech — TimberTech
- Decking Installation Best Practices Overview | TimberTech — TimberTech